Take the SSD you have prepared, put it into the SSD slot, and perform the above steps in reverse order to complete the replacement. Pull the HDD straight out of the slot and remove it. Hold the HDD cover near the edge of the screw retention port and remove it. Use a Phillips screwdriver to unscrew the long screws holding the HDD cover in place. Use the spudger to disconnect the square tabs of the battery connector from the socket. Repeat the steps for the opposite corner. Then insert a flat into the gap, and pry up the back cover to release the pick. Insert the opening pick between the lower left side of the back cover and the chassis, and leave the pick. Then use the T5 Torx screwdriver to remove the eight 3.3 mm-long screws and unfasten the back over. Discharge the Dell battery below 25% and power it down. EaseUS Disk Copy can perfectly work as Microsoft cloning software. Once you've made sure all your tools are ready, follow these 9 steps to replace your HDD with an SSD. When Windows 10 users need to upgrade a hard drive to transfer operating system to a new HDD, SSD or even a new PC, the only default option they can reply on is the System Image function in the Windows Backup and Restore (Windows 7) program. To begin with, you need to prepare the following tools: If you just need to install a brand new Windows onto your SSD, then replacing your HDD with an SSD is not so difficult, and you can start by following the specific guide I have given below. EaseUS Disk Copy is one of the best professional cloning programs on the market today not only can it create a complete clone of your HDD or SSD in a very short time, and it can do all common cloning jobs more efficiently.
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |